![Brother FAX-8650P Owner'S Manual Download Page 136](http://html.mh-extra.com/html/brother/fax-8650p/fax-8650p_owners-manual_53584136.webp)
125
T R O U B L E S H O O T I N G A N D M A I N T E N A N C E
DIFFICULTY
SUGGESTIONS
My headers or footers
Most laser printers have a restriced area that will not accept
appear when I view my
print. Usually these are the first two lines and last two lines,
document on the screen but leaves 62 printable lines. Adjust the top and bottom margins
do not show up when I
in your document to allow for this.
print them.
I cannot print from my
Make sure the Windows
®
printer driver is installed and you
application software.
select it in your application software.
Sometimes I get an error
If you are using the supplied Windows
®
driver, turn the error
message PRINT
recover operation on in the Setup dialog box and try again.
OVERRUN when printing Reduce the print resolution or reduce the complexity of your
certain documents from
document and try again.
Windows
®
.
I cannot print from my
Check that the DOS application software interface settings
application software.
match those of your printer: for example, if you are using a
parallel printer cable, you would probably set your DOS
software printer port to LPT1. Check for an error message
on the LCD.
The machine prints, but it
This is an indication that your application printer emulation
prints incorrect information. setting and the machine’s printer emulation do not match.
Sometimes it prints a
Check your application software to make sure you selected
couple of characters and
the correct printer driver.
then ejects the page, etc.
The machine does not load Check to see if the CHECK PAPER or PRINTER JAM
paper. The LCD shows
message appears on the LCD. If so, the Multi-purpose
CHECK PAPER or
Sheet Feeder may be out of paper or not properly installed.
PRINTER JAM
If it is empty, load a new stack of paper into the feeder. If
there is paper in the Multi-purpose Sheet Feeder, make sure
it is straight. If the paper is curled, you should straighten it.
Sometimes it is helpful to remove the paper, turn the stack
over and put it back into the Multi-purpose Sheet Feeder.
Reduce the amount of paper in the Multi-purpose Sheet
Feeder, then try again.
The machine does not load Reinsert the paper firmly, one sheet at a time.
paper from the manual
feed slot.
How can I clear paper
See “Printer Jams”.
jams?
Vertical streaks appear in
Sometimes you may see vertical streaks on your copies.
copies
Either the scanner or the primary corona wire for printing is
dirty. Clean them both.
Printouts are too dark or
Adjust the print conditions by setting the Print Density
light
function, It has been factory set to the middle position. See
“Setting the Print Density” in chap. 5.
Windows
®
Setup Printing
Difficulties
(For FAX-
8650P only)
Paper
Handling
Difficulties
Copy Quality
Difficulties
Print Quality
Difficulties
DOS Setup
Printing
Difficulties
(For FAX-
8650P only)
Summary of Contents for FAX-8650P
