Brother FAX-817 Series Page 58 User Manual Download

Page: 58 / 130

6 - 2

Setup Send

Fax Redial

If you are sending a fax manually and the line is busy, press

Redial/Pause

, and then press

Fax Start

to try again. If you want

to make a second call to the last number dialled, you can save time
by pressing

Redial/Pause

and

Fax Start

Redial/Pause

only works if you dialled from the control panel.

If you are sending a fax automatically

and the line is busy, the fax

machine will automatically redial three times at five minute
intervals.

How to fax

Automatic transmission

This is the easiest way to send a fax. Documents must be between
150 and 600 mm long and between 148 and 216 mm wide,
regardless of the paper width.

IMPORTANT:

Do not pick up the handset or press

Speaker Phone

(FAX-837MC only).

Insert the document face down, top edge first in the Automatic
Document Feeder (ADF).

Adjust the paper guides to fit the width of your document.

Enter the fax number using One-Touch, Speed-Dial, Search
or the dial pad. (See

Press

Fax Start

Do not use paper that is curled, wrinkled, folded, ripped,
stapled, paper clipped, pasted, or taped.

Do not use cardboard, newspaper or fabric.

The ADF can hold up to 10 pages, feeding each one
individually through the fax machine. Use standard 64 g/m

90 g/m

paper when using the ADF; if you are using heavier

paper, feed each sheet individually to prevent paper jams.

Paper Guides

Summary of Contents for FAX-817 Series



































































































































Search results

Summary of Contents for FAX-817 Series

Reviews:

Related manuals for FAX-817 Series

Brands by name

Popular brands

Brother FAX-817 Series, User Manual

Search results

Summary of Contents for FAX-817 Series

Reviews:

Related manuals for FAX-817 Series

Brands by name

Popular brands