Brother FAX-817 Series User Manual Download

Page: 15 / 130

Introduction

1 - 2

Part names

■

Front view

■

Back view

No. Name

Description

Power Cord

Use to connect the fax machine to the
electrical socket.

Telephone Line Cord

Connect the fax machine to a telephone
wall socket.

Telephone Handset

Use when receiving or making voice
calls.

Handset Curled Cord

Use to connect the handset to the fax
machine.

Document Support

Supports the document in the ADF.

Paper Wire Extension

Supports the paper in the paper tray.

Paper Tray

Load paper here.

Paper Guides

Press and slide to fit the document width.

Control Panel

Use the keys and display to control the
fax machine.

Cover Open Lever

To open the top cover, lift this lever.

No. Name

Description

AC Power Connector

Plug in the power cord here.

Telephone Line Socket
(LINE)

Plug in the telephone line here.

External Telephone Line
Socket (EXT.)

Plug in the telephone line of an external
telephone here.

Control Panel

Telephone Handset

Handset Curled

Cord

Paper Wire

Extension

Paper Tray

Paper Guides

Telephone

Line Cord

Cover Open

Lever

Power Cord

(Example for
Australia)

Document

Support

Telephone

Line Socket

External

Telephone Line
Socket

AC Power

Connector

Summary of Contents for FAX-817 Series



































































































































Search results

Summary of Contents for FAX-817 Series

Reviews:

Related manuals for FAX-817 Series

Brands by name

Popular brands

Brother FAX-817 Series, User Manual

Search results

Summary of Contents for FAX-817 Series

Reviews:

Related manuals for FAX-817 Series

Brands by name

Popular brands