Brother FAX-817 Series Page 79 User Manual Download

Page: 79 / 130

Remote Fax Options

8 - 1

This chapter is for Model FAX-817/827. If you have model
FAX-837MC, your remote fax options are handled by the Message
Centre.

Fax Forwarding

Setting up Fax Forwarding

When you select Fax Forward, your fax machine stores the
received fax in the memory. The fax machine will then dial the fax
number you’ve programmed and forwards the fax message.

Press

Menu/Set

Press

▲

▼

to select

FAX FORWARD

Press

Menu/Set

Enter the forwarding number (up to 20 digits).

Press

Menu/Set

Press

▲

▼

to select

BACKUP PRINT:ON

BACKUP PRINT:OFF

Press

Menu/Set

The LCD will ask you to enter the fax number to which faxes
will be forwarded.

Press

Stop/Exit

Remote Fax Options

(FAX-817/827 only)

■

If you select

BACKUP PRINT:ON

, faxes will also be printed

at your fax machine so you will have a copy if there is a
power failure before it is forwarded.

■

If you select

BACKUP PRINT:OFF

, the data in the memory

might be lost when there is a power failure.

1.FORWARD/STORE

BACKUP PRINT:ON

SELECT

↑

↓

& SET

Summary of Contents for FAX-817 Series



































































































































Search results

Summary of Contents for FAX-817 Series

Reviews:

Related manuals for FAX-817 Series

Brands by name

Popular brands

Brother FAX-817 Series, User Manual

Search results

Summary of Contents for FAX-817 Series

Reviews:

Related manuals for FAX-817 Series

Brands by name

Popular brands