Brother E-100 Operation Manual Download Page 34

Page: 34 / 66

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

WORKING WITH TEXT (WHEN A FRAME OR TEMPLATE PATTERN IS SELECTED)

CONTENTS

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

INDEX

Chapter 6

WORKING WITH TEXT (WHEN A FRAME OR TEMPLATE
PATTERN IS SELECTED)

With frame and template patterns, you can enter text and select the font that will be used for

embroidering. The

mark in the pattern list and on the LCD display shows where text can be

added. The number of lines and characters that can be entered depends on the pattern selected.

The following two fonts are available in two sizes.

CAUTION

•

Template patterns are embroidery that have only text. If no text is entered, the embroidery
cannot be sewn.

Large (about 10 mm high)

Satin stitches

Small (about 7 mm high)

Straight stitches

(Sewn image)

NOTE

• For a list of characters that can be entered, see page

CAUTION

•

All text appearing in the same line must have the same font. But, each line in a template
with more than one line can have different fonts.

•

All text appearing in the same line must have the same size. But, each line in a template
with more than one line can have different sizes.

•

With some patterns, the large fonts cannot be chosen.

•

The number of letters that can be entered within

depends on the pattern and the

selected font and text size.

Summary of Contents for E-100



































































Search results

Summary of Contents for E-100

Reviews:

Related manuals for E-100

Brands by name

Popular brands

Brother E-100, Operation Manual

Search results

Summary of Contents for E-100

Reviews:

Related manuals for E-100

Brands by name

Popular brands