Brother E-100 Operation Manual Download Page 44

Page: 44 / 66

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

RETRIEVING A SAVED PATTERN

CONTENTS

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

INDEX

Chapter 6

RETRIEVING A SAVED PATTERN

Saved patterns can quickly be retrieved to be used again.

Press the

key until

highlighted.

Press the

key.

A screen like the one shown at the right appears.

Indicates that this screen is for retrieving saved
patterns
(For details about the other symbols, see page 34.)

Press the

key until the pocket

with the pattern that you want is
highlighted.

Press the

key.

A screen like the one shown at the right appears.
(For details about the other symbols, see page 35.)

NOTE

•

If the saved pattern that you want to retrieve is from a design cassette, be sure that the
design cassette is inserted before turning on the machine.

Key information

•

If you want to select a different saved pattern, press the

key.

Summary of Contents for E-100



































































Search results

Summary of Contents for E-100

Reviews:

Related manuals for E-100

Brands by name

Popular brands

Brother E-100, Operation Manual

Search results

Summary of Contents for E-100

Reviews:

Related manuals for E-100

Brands by name

Popular brands