Brother E-100 Operation Manual Download Page 41

Page: 41 / 66

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

SAVING A PATTERN

CONTENTS

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

INDEX

Chapter 6

Select the pattern, enter the text, and
sew the embroidery in the same way
that you would with a built-in pattern.

This indicator appears when a pattern from the design
cassette is selected.

SAVING A PATTERN

Patterns that you use often or patterns with text that you entered can be saved so you can quickly select
them to be used again. Up to four patterns can be saved.

Press the

key until

highlighted.

Press the

key.

A screen like the one shown at the right appears.

This indicates that this screen is for saving patterns.

This means that a pattern has not yet been saved in this
pocket. The number refers to the pocket that the
information will be saved in.

“

” indicates that a pattern has already been saved in

this pocket.

This indicator appears if the pattern saved in the
selected pocket will be embroidered with a chenille texture.

If patterns from a design cassette have been saved,
a screen like the one shown at the right appears.

The

mark means that the pattern saved in

that pocket is from the inserted design cassette.

The

mark means that the pattern saved in

that pocket is not from the inserted design cassette in
place at this time.

This indicator appears if the pattern saved in a pocket

with the

mark is selected or a

design cassette is inserted.

NOTE

•

The design cassettes may contain more than one pattern category.

•

For more information about the patterns, check the pattern list included with each
optional design cassette.

NOTE

•

This is the same screen that appears after embroidering is finished or when the

key

is pressed while the screen shown on page 13 of the section

Inserting the thread cartridge

and design frame

is displayed.

SELECTING A PATTERN FROM A DESIGN CASSETTE / SAVING A PATTERN

Summary of Contents for E-100



































































Search results

Summary of Contents for E-100

Reviews:

Related manuals for E-100

Brands by name

Popular brands

Brother E-100, Operation Manual

Search results

Summary of Contents for E-100

Reviews:

Related manuals for E-100

Brands by name

Popular brands