43
DH4-B981
7. SEWING
7. SEWING
Make sure you know where the EMERGENCY STOP switch is and how it is used before operating the sewing
machine.
7-1. Using the EMERGENCY STOP switch
In automatic mode
1. Press the EMERGENCY STOP switch
q
.
* All machine operations will stop and the buzzer will sound. The RESET indicator will illuminate and "60" will
1. *
appear on the number display window at this time.
2. Eliminate the cause of the problem.
2.
* Be careful not to depress the start switch
w
by mistake when eliminating the cause of a problem after the
2. *
EMERGENCY STOP switch
q
has been pressed, otherwise the sewing machine might start operating.
2.
* The machine will not always stop in the needle up position if the EMERGENCY STOP switch
q
is pressed during
2. *
sewing.
2. *
If "40" appears in the number display window, turn the upper shaft pulley by hand to raise the needle to the needle
2. *
up position (so that the marks are aligned).
3. To continue sewing, press the start switch
w
.
3.
* The RESET indicator will switch off, the "60" will be cleared from the number display window and sewing will
3. *
begin again.
3. *
To stop sewing, press the RESET switch
e
.
3.
* The RESET indicator will switch off, the "60" will be cleared from the number display window and the feed bracket
3. *
will return to the cloth setting position.
In manual mode or in automatic mode
1. Press the EMERGENCY STOP switch
q
.
1.
* All machine operations will stop and the buzzer will sound. The RESET indicator will illuminate and "60" will
1. *
appear on the number display window at this time.
2. Eliminate the cause of the problem.
3. Press the RESET switch
e
.
3.
* The RESET indicator will switch off, the "60" error code will be cleared from the number display window and the
3. *
feed bracket will return to the cloth setting position.
w
q
0928Q
0927Q
0929Q
e
