14
DH4-B981
3. INSTALLATION
3-15. Securing the cables
1. Pass the cable through the cable holder
q
, and then
1.
secure the cable holder
q
to the underside of the work
1.
table with the screw.
2. Pass the air tube and the hand switch cable through
2.
the cable holder
w
, and then secure the cable holder
2.
w
to the underside of the work table with the screw.
3. Place the machine head cable together with the valve
3.
cable assembly and motor cable, pass them all through
3.
the cable holder
e
, and then secure the cable holder
3.
e
to the underside of the work table with the screw.
Insert the specification harness
q
into the control box con-
nector
w
.
NOTE:
Check that the label number on the specification
harness
q
matches the movable knife (R)
e
,
movable knife (L)
r
, thread handler
t
, work clamp
(R)
y
, work clamp (L)
u
and movable knife driving
cam
i
numbers before inserting the specification
harness
q
. (If a connector with an incorrect label
number is connected, it may cause problems such as
damage to the sewing machine or thread trimming
errors.)
No.
No.
u
i
r
e
y
q
w
e
No.
w
q
t
< -02 >
* There is 10 mm of difference in the knife installation positions
between L1 - L4 and L5- L7.
Specification
-00, -01
-02
L1
L2
L3
L4
L5
L6
L7
Label No. of
harness
0
1
2
3
4
5
6
7
Right/left work clamp No.
Right/left movable knife No.
Thread handler No.
1
2
3
4
5
6
7
0831Q
0830Q
0832Q
0833Q