Brother DCP-L8400CDN Basic User'S Manual Download Page 32

Page: 32 / 211

Chapter 2

Send the print job to the machine.

NOTE

• Remove each envelope as soon as it has

been printed. Stacking the envelopes may
cause them to jam or curl.

• If envelopes or thick paper get smudged

during printing set the

Media Type

Env.

Thick

Thicker Paper

to increase the

fixing temperature.

• If the envelopes are creased after they are

printed, see

Improving the print quality

on page 120.

• If your thick paper curls during printing,

load only one sheet at a time in the MP
tray.

• Envelope joints that are sealed by the

manufacturer should be secure.

• All sides of the envelope should be

correctly folded without wrinkles or
creases.

(For printing envelopes only)
When you have finished printing, reset
the two grey levers that you pulled down
in step

back to their original positions.

Close the back cover (face-up output
tray).

NOTE

• For 2-sided printing of copies, see

Advanced User’s Guide.

• For 2-sided printing using your computer,

see Software and Network User’s Guide.

Summary of Contents for DCP-L8400CDN




















































































































































































































Search results

Summary of Contents for DCP-L8400CDN

Reviews:

Related manuals for DCP-L8400CDN

Brands by name

Popular brands

Brother DCP-L8400CDN, Basic User'S Manual

Search results

Summary of Contents for DCP-L8400CDN

Reviews:

Related manuals for DCP-L8400CDN

Brands by name

Popular brands