Brother DCP-7010 User Manual Download Page 65

Page: 65 / 71

Specifications

S - 4

Printer

Interfaces

(Cables are not included.)

Note

Your machine has a full-speed USB 2.0 interface. This interface is compatible with Hi-Speed USB
2.0; however, the maximum data transfer rate will be 12 Mbits/s. The machine can also be
connected to a computer that has a USB 1.1 interface.

Please make sure you use a USB 2.0 interface cable that is no longer than 2.0 m.

Emulation

Brother Printing System for Windows

PCL6 and BR-Script (PostScript

) Level 3 (DCP-7025 only)

Printer Driver

Support for Windows

98/98SE/Me/2000 Professional/XP/

Windows NT

Workstation Version 4.0

Support for Mac OS

9.1 - 9.2/Mac OS

X 10.2.4 or greater

Resolution

HQ1200 (Max. 2400 x 600 dots per inch (dpi))

Print Quality

Normal printing mode

Economy printing mode (save toner usage)

Print Speed

up to 20 pages/minute (A4 size)

* Based on Brother standard pattern.

Does not include the time it takes to feed the paper.

First Print

Less than 10 seconds

Interface

Recommended Cable

Parallel

A bi-directional shielded parallel cable that is IEEE 1284 compliant
and no longer than 2.0 m.

USB

A USB 2.0 interface cable that is not longer than 2.0 m.

Summary of Contents for DCP-7010








































































Search results

Summary of Contents for DCP-7010

Reviews:

Related manuals for DCP-7010

Brands by name

Popular brands

Brother DCP-7010, User Manual

Search results

Summary of Contents for DCP-7010

Reviews:

Related manuals for DCP-7010

Brands by name

Popular brands