Brother DCP-7010 User Manual Download Page 10

Page: 10 / 71

Chapter 1

1 - 2

Choosing a location

Place your machine on a flat, stable surface that is free of vibration and shocks, such as a desk.
Put the machine near a standard, grounded electrical socket. Choose a location where the
temperature remains between 10°C and 32.5°C.

CAUTION

■

Avoid placing your machine in a high-traffic area.

■

Do not place your machine near heaters, air conditioners, water, chemicals, or refrigerators.

■

Do not expose your machine to direct sunlight, excessive heat, moisture, or dust.

■

Do not connect your machine to an electrical socket controlled by wall switches or automatic
timers.

■

Disruption of power can wipe out information in the machine’s memory.

■

Do not connect your machine to an electrical socket on the same circuit as large appliances
or other equipment that might disrupt the power supply.

■

Avoid interference sources, such as speakers or the base units of cordless phones.

Summary of Contents for DCP-7010








































































Search results

Summary of Contents for DCP-7010

Reviews:

Related manuals for DCP-7010

Brands by name

Popular brands

Brother DCP-7010, User Manual

Search results

Summary of Contents for DCP-7010

Reviews:

Related manuals for DCP-7010

Brands by name

Popular brands