Brother DCP-585CW, Quick Setup Manual

Page: 17 / 28

17
For Wireless Network Users
Wirele
ss Network
h
Press
a
or
b
to choose
TKIP
or
AES
for
Encryption Type?
and press OK .
Enter the WPA/WPA2-PSK password you
wrote down in step
10
on page 15 using the
a
,
b
keys to choose each letter or number.
You can use the
d
and
c
keys to move the
cursor left and right. For example, to enter the
letter
a
, press the
a
key once. To enter the
number
3
, hold down the
a
key until it appears.
The letters appear in this order: lower case,
upper case, numbers and then special letters.
(For more information, see
Entering Text for
Wireless Settings on page 21.)
Press OK when you have entered all the
characters, then press
Yes
to apply your
settings. Go to
i
.
i
Your machine will now try to connect to your
wireless network using the information you
have entered. If successful,
Connected
will
appear briefly on the LCD.
If your machine does not successfully connect
to your network, verify your network settings
collected in step
10
on page 15 then repeat
a
to
h
to make sure you have entered the correct
information.
If your access point does not have DHCP
enabled you will need to manually configure
the IP address, subnet mask and gateway of
the machine to suit your network. See the
Network User’s Guide for details.
Wireless setup is now complete. A four
level indicator on the bottom of your
machine’s LCD will show the wireless
signal strength of your access point or
router.
To install MFL-Pro Suite, continue to
step
12
.
For Windows
®
Users:
Now go to
Page 18
For Mac OS
®
Users:
Now go to
Page 19