8
HOW TO USE THE ON BOARD TOOLS
Place the vacuum cleaner in the Upright position.
Set the Tools/Floor Selector to the
“TOOLS” position.
Detach the telescopic wand from the
back of the vacuum.
Then select the tool best suited for
the cleaning task from the descrip-
tions below.
For reaching ceilings, curtains,etc.(Fig.15)
Turn the wand to unlock; wand will turn freely.
Extend the wand to its full length. Then turn the
wand to lock.(Fig.12)
Telescopic wand
For door tracks, narrow spots, etc.(Fig.13)
Use with the brush for covered furniture, table
tops, books, lamps, baseboards , etc.
Use without the brush for draperies, mattresses,
clothing, carpeted stairs, etc. (Fig.14)
Crevice tool
Combination Expandable Stair/Floor/Uphol-
stery tool with Detachable Brush.(Fig.16-2)
Combination Stair/Floor/Upholstery tool with Detachable Brush
Pull both ends outward for the Upholstery
tool to expand. (Fig.16-1)
To return to the original size, push both
ends toward the center.
To detach the brushes, grasp them on the
inside (Fig. 16-2) and pull out toward you.
Snap them back in to replace.
Fig.11
Fig.12
Fig.13
Fig.14
Fig.15
Fig.16-1
Fig.16-2
1
2
3
Combination
Expandable Stair/Floor/
Upholstery Tool with
Detachable Brush
Floor / Tools Selector
Crevice tool
Telescopic wand
OPERATING INSTRUCTIONS
1
2
CT1200/CT1500Layout
1.3.8, 4:02 PM
8
