manualshive.com logo in svg

Brother CT-1200, Operation Manual

Share
Download
Brother CT-1200 Operation Manual Download Page 15

15

Belt change
 guide

1

Fig.38

After removing the bottom plate
(see page 13), lift up the belt
cover and remove the pulley cover
to determine if the belt is worn or
broken. (Fig. 38)

2

3

4

HOW TO REPLACE THE BELT

 (CT1500 type)

When replacing the belt, always set
the RUG/FLOOR Selector to the
“FLOOR” position.

Pull out the agitator and then remove the flat belt
from the motor shaft. (Fig. 39)

Loop the new belt around the motor shaft and
agitator as shown. (Fig. 40)

Then re-insert the agitator assembly, making
sure that both ends of the agitator assembly fit in
the groove of the nozzle head. (Fig. 41)
Be sure to install the new flat belt into the guide
properly.

Fig.39

Fig.40

Fig.41

5

Be sure that the flat belt is not twisted and all
rotating parts move smoothly. (Fig. 42)
After reinstalling the pulley cover, close the belt
cover and replace the bottom plate.

Fig.42

Pulley cover

Idler pulley

Main pulley

Agitator assembly

Flat belt

Motor shaft

Belt cover

Flat belt

Main pulley

Idling pulley

Motor shaft

New belt

Groove

Groove

Agitator
assembly

Belt cover

Pulley cover

REPLACEMENT INSTRUCTIONS

CT1200/CT1500Layout

1.3.8, 4:02 PM

15

Summary of Contents for CT-1200

























Reviews:

No comments

Brands by name

Popular brands

Load more brands