6
OPERATING INSTRUCTIONS
First remove the handle screw.
Then insert the base of the handle into
the top of the body of the vacuum
cleaner as shown. (Fig. 1)
1
HOW TO ATTACH THE HANDLE TO VACUUM CLEANER
Fig.1
Fig.2
Line up the small hole on the handle with
the small hole on the rear of the vacuum
cleaner and insert the screw. (Fig. 2)
Be sure the screw is tightened securely.
2
Insert the power cord in the clip
located on the upper cord storage
hook as shown. (Fig. 3)
1
HOW TO WIND POWER CORD
Wrap excess cord
around the cord stor-
age hooks to prevent
dragging and any in-
terference with clean-
ing. (Fig. 4)
2
Fig.3
HOW TO RELEASE POWER CORD
Fig.5
Rotate the upper cord storage
hook downward for quick cord
release. (Fig. 5)
Fig.4
Make sure the ON/OFF
switch on the handle is
positioned to the front
of the vacuum cleaner.
Unit should be un-
plugged and power
switch in the “OFF”
position.
Handle
Note:
Handle screw
Handle screw
Handle
Clip
Plug Side
Upper cord
storage hook
Upper cord storage hook
CT1200/CT1500Layout
1.3.8, 4:02 PM
6
