Brother 891-Z01 Operation Manual Download

Page: 68 / 72

Using a USB flash drive, the machine’s software can

be upgraded. For upgrade information, refer to

details posted on the Brother Solutions Center (http://

solutions.brother.com/). If an upgrade file is posted,

download the file, and then upgrade the machine

according to the following procedure.

While holding down

in the operation

panel, press

to turn on the machine.

Plug the USB flash drive containing the upgrade
file into the USB port on this machine.

The USB flash drive must not contain any data other

than the upgrade file. Otherwise, the machine may

stop operating correctly.

Note

•

This machine is incompatible with a USB hub.
Plug the USB flash drive directly into the USB
port.

Touch the “Update” key to start the upgrade.

When upgrading is finished, the completion

message appears.

Unplug the USB flash drive from the port.

Turn the machine off, then on again.

The following are available as optional accessories

to be purchased separately.

Contact the retailer who sold you this machine or
the nearest authorized service center.

UPGRADING THE SOFTWARE

OPTIONAL ACCESSORIES

10.

11.

12.

13.

14.

15.

No.

Part Name

Part Code

Low tack adhesive mat 12" × 12"
(305 mm × 305 mm) (turquoise)

CAMATP12

Low tack adhesive mat 12" × 24"
(305 mm × 610 mm) (turquoise)

CAMATP24

Standard cut blade holder
(turquoise) (with no blade)

CAHLP1

Standard cut blade

CABLDP1

Scanning mat 12" × 12"
(305 mm × 305 mm)

CAMATS12

Standard mat 12" × 12"
(305 mm × 305 mm)
(turquoise and purple)

CAMATF12

Standard mat 12" × 24"
(305 mm × 610 mm)
(turquoise and purple)

CAMATF24

Deep cut blade holder (purple)
(with no blade)

CAHLF1

Deep cut blade

CABLDF1

Pen holder

CAPENHL1

Color pen set

CAPEN1

Erasable pen set

CAPEN2

Contents USB

Iron-on fabric appliqué contact
sheet (white backing)

CASTBL1

High tack adhesive fabric support
sheet (light blue backing)

CASTBL2

Summary of Contents for 891-Z01









































































Search results

Summary of Contents for 891-Z01

Reviews:

Related manuals for 891-Z01

Brands by name

Popular brands

Brother 891-Z01, Operation Manual

Search results

Summary of Contents for 891-Z01

Reviews:

Related manuals for 891-Z01

Brands by name

Popular brands