Brother 891-Z01 Operation Manual Download | Manualshive

Page: 2 / 72

background image

IMPORTANT:

READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
By downloading, copying, installing or using the software, you agree to this license. If you do not
agree to this license, do not download, install, copy or use the software.

Intel License Agreement For Open Source Computer Vision Library

Copyright © 2000, Intel Corporation, all rights reserved. Third-party copyrights are the property of their respective owners.

Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:

●

Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

●

Redistribution in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.

●

The name of Intel Corporation may not be used to endorse or promote products derived from this software without specific
prior written permission.

This software is provided by the copyright holders and contributors “as is” and any express or
implied warranties, including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose are disclaimed. In no event shall Intel or contributors be liable for any
direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited
to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption)
however caused and on any theory of liability, whether in contract, strict liability, or tort (including
negligence or otherwise) arising in any way out of the use of this software, even if advised of the
possibility of such damage.

All information provided related to future Intel products and plans is preliminary and subject to change at any time, without notice.

TRADEMARKS

The Brother logo is a registered trademark of Brother Industries, Ltd.

«
1
2
3
4
...
»

Summary of Contents for 891-Z01









































































Reviews:

No comments

Related manuals for 891-Z01

Brand: P.I.T. Pages: 23

Brand: RCBS Pages: 2

Brand: Lincoln Electric Pages: 42

Brand: Homelite Pages: 169

K650 ACTIVE III

Brand: Partner Pages: 24

Diamond3 FB750W

Brand: B+BTec Pages: 36

Brand: EINHELL Pages: 32

Brand: EINHELL Pages: 46

Brand: Lassco Wizer Pages: 13

HL40-5g Hobby Advanced

Brand: Full Spectrum Laser Pages: 91

Brand: Batavia Pages: 6

Brand: DCSENG Pages: 29

Brand: DCSENG Pages: 31

Brand: Jepson Pages: 27

Brand: Panduit Pages: 12

ADAPTIVE CUTTING SYSTEM

Brand: Kreg Pages: 80

Brand: Efco Pages: 24

Brand: EFA Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands