Winding/Installing the Bobbin
35
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
a
Press
(Needle position button) once or
twice to raise the needle, and then raise the
presser foot lever.
a
Needle position button
b
Presser foot lever
b
Turn off the machine.
c
Slide the bobbin cover latch to the right.
a
Bobbin cover
b
Latch
X
The bobbin cover opens.
d
Remove the bobbin cover.
e
Hold the bobbin with your right hand and hold
the end of the thread with your left hand.
• Be careful not to drop the bobbin.
f
Insert the bobbin into the bobbin case with
your right hand.
• Be sure to insert the bobbin correctly.
CAUTION
g
Lightly hold down the bobbin with your right
hand, and then guide the thread as shown with
your left hand.
h
Pass the thread through the slot as shown, and
then pull the thread out toward the front.
a
Cutter
X
The cutter cuts the thread.
a
b
a
b
●
Be sure to insert the bobbin and depress it
to the bottom with your finger.
Otherwise, the thread may break or the
thread tension will be incorrect.
●
Be sure to thread the machine as
indicated. Otherwise, the thread may
break or the thread tension will be
incorrect.
a
0711-0120-C-combo_E.book Page 35 Thursday, July 24, 2008 1:46 PM