manualshive.com logo in svg

Brother 885-V51, Operation Manual, Page: 15 / 92

Share
Download
Brother 885-V51 Operation Manual Download Page 15

13

 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 

Operation panel

The front operation panel has an LCD (liquid crystal display) and operation keys.

a

LCD (liquid crystal display) (touch panel)

Setting for the selected pattern and error messages 
appear in the LCD.
Touch the keys displayed on the LCD with your finger 
or a touch pen to perform operations.
For details, refer to "LCD (Liquid Crystal Display) 
Operation" (page 22).

b

Back key 

Press to return to the previous screen.

c

Previous page key

 

Press to display the previous page when there are items 
that are not displayed on the LCD.

d

Next page key

 

Press to display the next page when there are items that 
are not displayed on the LCD.

e

Memory key

 

Press to save embroidery patterns and the alphanumeric 
characters in the machine’s memory.

f

Embroidery key

 

Press to display the pattern type selection screen.

g

Settings key

 

Press to display the settings screen.

h

Help key

 

Press to get help on using the machine. Displays simple 
explanations of setting upper thread / bobbin winding / 
setting bobbin thread / embroidery unit attachment / 
embroidery frame attachment / needle replacement.

0711-0120-C-combo_E.book  Page 13  Thursday, July 24, 2008  1:46 PM

Summary of Contents for 885-V51





























































































Reviews:

No comments