12
b
c
d
a
c
a
b
Spool of Thread
�
2
Spool Cushion
Spool Cap
�
1
Threading (1)
CAUTION
Do not move bobbin winding clutch while
machine is running.
Bobbin Winding
Raise the thread guide bar all the way.
1
Mount a spool of thread on the spool pin.
2
✽
1 Use spool cap when using parallel-wound thread.
✽
2 Use spool cushion when using cross-wound thread.
Pass the thread through the
3
triangular hole.
Pass thread through bobbin winding
4
thread guide as shown in drawing.
Run thread through top
5
thread notch 1, and turning
the bobbin align bottom
thread notch 2 of the bobbin
with guide pin on bobbin
winder shaft.
Press bobbin winding clutch up against
6
empty bobbin. If the bobbin stop does not
slide easily between the top and bottom of
the bobbin, check that the bobbin is seated
properly with the guide pin (
5
) inserted into
the lower notch.
Bobbin
Bobbin Winder
Shaft
Guide Pin
Thread Notch 1
Thread Notch 2
Bobbin Winding Clutch
5
-
A
: See the following illustrations.
