Brother 882-D83 Operation Manual Download Page 141

Page: 141 / 180

EDITING PATTERNS

Em
br

oide

Ed
it

Embroidering

E-77

Create the repeated pattern with the thread
mark at the center of the end of the pattern.

Refer to “Assigning Thread Marks” on page E-75.

Press ,

then .

Press the “Start/Stop” button to begin
embroidering.



When embroidering is finished, the thread mark is
sewn with the last thread color.

Remove the embroidery frame.

Rehoop the fabric in the embroidery frame.

Attach the embroidery frame to the
machine, and then touch

Note

• Adjust the position of the fabric so that the

embroidering area for the next pattern is
within the embroidering area of the
embroidery sheet.

Pattern embroidered first

Position of pattern to be embroidered next

Embroidering area of embroidery sheet

Summary of Contents for 882-D83





















































































































































































Search results

Summary of Contents for 882-D83

Reviews:

Related manuals for 882-D83

Brands by name

Popular brands

Brother 882-D83, Operation Manual

Search results

Summary of Contents for 882-D83

Reviews:

Related manuals for 882-D83

Brands by name

Popular brands