Brother 882-D83 Operation Manual Download Page 135

Page: 135 / 180

EDITING PATTERNS

Em
br

oide

Ed
it

Embroidering

E-71

Press

and then press

Press .



The “Saving” screen is displayed. When the data is
loaded to the machine, the display returns to the
original screen automatically.

The recalled custom thread table is
displayed on the screen.

Choosing a Color from the
Custom Thread Table

You can select a color from the up to 300 thread
colors you have set in the custom thread table.

Press .



The thread color palette screen displays.

Press

to put the color you want

to change at the top of the sewing order.

Note

• Do not insert or remove USB media while

“Saving” screen is displayed. You will lose
some or all of the data you are saving.

Summary of Contents for 882-D83





















































































































































































Search results

Summary of Contents for 882-D83

Reviews:

Related manuals for 882-D83

Brands by name

Popular brands

Brother 882-D83, Operation Manual

Search results

Summary of Contents for 882-D83

Reviews:

Related manuals for 882-D83

Brands by name

Popular brands