Brother 206627 User Manual Download

Page: 50 / 82

Page 39

Charging the Battery

NOTE:

Batteries are shipped from the factory uncharged. Brother recommends that

a complete charging cycle (following steps 1 through 3 below) be completed

before using the battery for the first time.

1. Make sure the printer is connected to an AC power outlet with the AC adapter and

power cord or a DC power cord.

2. Make sure the printer is off.

3. Press the main switch and hold it down for a few seconds until the POWER indicator

light begins to blink. This puts the printer in Charge Mode and starts the charging of

the battery.

The POWER indicator light blinks until charging is complete.

The maximum time to charge to 100% capacity is approximately 120 minutes.

When the printer finishes charging the battery, it automatically turns itself off, and the

POWER indicator light goes off.

Note that when the printer is connected to an external source of power, it will

constantly draw approximately 120 mA to trickle charge the battery.

Stopping the Charge Process

If you want to stop the printer while it is in Charge mode, press the main switch

twice quickly.

Summary of Contents for 206627



















































































Search results

Summary of Contents for 206627

Reviews:

Related manuals for 206627

Brands by name

Popular brands

Brother 206627, User Manual

Search results

Summary of Contents for 206627

Reviews:

Related manuals for 206627

Brands by name

Popular brands