Brother 206627, User Manual

Page: 28 / 82

Page 17
PocketJet Configuration Utility
The CD supplied with the printers (PJ-522, PJ-523) contains a PocketJet Configuration
Utility. This can be used to access advanced printer settings for custom installations if
needed.
The Configuration Utility can be used in these three situations:
§
If you are printing from a Windows 2000, XP, or Vista-based system and
are using the Windows driver supplied by Brother, only the following five
options should be configured from the configuration utility:
§
Auto- On
§
Auto- Off
§
Pre-feed
For Bluetooth Printers:
§
PIN Code Setting
§
Local Name Setting
Note that all other settings in the Configuration Utility window will be overwritten
by the installed driver settings.
§
If you are printing from a Windows system but are not using the Windows
driver supplied by Brother, all options can be configured.
§
If you are printing from a non-Windows-based system, all options can be
configured.
Installing the PocketJet 3 Utility:
When using the CD Installation program to install drivers for Windows Vista, XP,
2000 Professional , you should select “Install Configuration Utility” Button. You
must follow the onscreen instructions to complete the installation (See “Driver
Installation”, page 7).
To install the PocketJet 3 Utility independently on a Windows host, browse the CD into
the <CD-Drive>:\<PJ3, PJ3BT, PJ3PLUS or PJ3PLUSBT> \Config folder, and then
double-click the PJ3CONFIGSETUP.EXE (or PJ3PLUSCONFIGSETUP.EXE), and
follow the onscreen instructions.