Brother 206627 User Manual Download

Page: 46 / 82

Page 35

Clean

Clicking on this button places the printer in “Cleaning Mode”. Refer to that

maintenance procedure in this manual for further instructions.

Factory Reset

Clicking on this button will return the printer to its original factory settings for

fonts and configuration. The configuration data from the file “PJ3Factory.cfg” or

“PJ3PlusFactory.cfg” on the same directory as exe file

will be loaded and displayed.

Since that file is expected to match the internal factory configuration of your printer,

this file’s properties are set to “Read Only” and it should not be modified.

Save Config

Clicking on this button will save the configuration as you see it to the file “PJ3Default.

cfg” or “PJ3PlusDefault.cfg” on the same directory as exe file

and then send this

configuration information to the printer. Be sure that all of the settings are adjusted

to your liking. Once sent to the printer, these settings will become the power-on

default settings but they can be changed subsequently as necessary..

Close:

This selection closes this application without sending data to the printer and without

saving the current settings.

Summary of Contents for 206627



















































































Search results

Summary of Contents for 206627

Reviews:

Related manuals for 206627

Brands by name

Popular brands

Brother 206627, User Manual

Search results

Summary of Contents for 206627

Reviews:

Related manuals for 206627

Brands by name

Popular brands