200707_3
20
Operating the Stove - Remote Control Version (Handset)
Setting the temperature display to Celsius or Fahrenheit
Press and release the + or - button to toggle between C and F.
When the display shows the desired symbol, press and releases the
“SET” button to store.
As the important settings above have now been done, press and hold
for a few seconds the “SET” button for a few seconds and this will exit
the setup menu. The control is now ready for use with the Fire Control.
Paging the handset
If you have misplaced the handset you can page it by pressing the + button only on the
fire control for around 5 seconds. The handset will flash and make a noise to help you to
locate it. Once you pick up the TESC it knows you hold it and so the sound stops. The
flashing and sound will last for 60 seconds each time the handset is paged as described.
If not found in 60 seconds, page again and so on. NOTE: PRESS “+” Button ONLY, NOT
“+” and “-‘Together as you will accidentally break the handset pairing and have to reset
handset to factory state and pair again (see other parts of the booklet if this happens).
Note: the legend at the bottom shows the battery condition of both the batteries in the
hand set and in the fire control alternately. RC = Remote Control handset and FC = Fire
control. The control is designed to get the most out of the batteries but when eventually
the display shows they are spent(when the battery legend is an empty area, we
recommend you change the batteries in the handset before they are flat, to avoid having
to re-program the time of day in again. N.B. Pairing is not lost, even if the batteries are
removed or flat.
Advanced settings Menu
In the event that you may want to change the other pre-set settings of the control
features. Do not do a long press and hold above but a normal short press and release
will take you into the advanced settings area.
Advanced settings options are:-
Back light –
o
A = Automatic (default setting). The back light comes on in the dark but
not in the light.
o
0 = Light never comes on.
o
1 = Light comes on whenever handset is unlocked.
Display contrast – 8 levels from 0 to 7 (default level 4).
P = pairing with other devices other than the fire control. The hand set can pair
with other modules to :-
L= Operate an electric light – which is the dimmable in 9 steps
o
F= operate an electric fan –which can have 9 speed levels
o
A= operate an auxiliary contact to operate another device.