200707_3
11
Assembly – Positioning the Coal Ceramics
Step 4
Place the 6 loose coals across the centre of the fire, so that they bridge the gap
between the rear and base ceramics. These coals should be rested gently in
position. Do not push them into the gap, as this will prevent the flames from
burning evenly and effectively. The path of the flame should not be obstructed.
Finally, close the stove door and wind on the M6 x 18 hex bolt back onto the door
fixing bolt, slide the handle over the nut and using the Allen key supplied tighten
the grub screw onto the nut.
Please Note
If there is any accumulation of soot within the fire chamber it may be
necessary to adjust the individual ceramics to ensure they are not
impeding any of the flames directly.