200707_3
16
Operating the Stove – Remote Control
This control is situated on the lower right hand side of your fire. The drawing
below shows the main features of the control.
The control requires 3 AA size alkaline batteries to be inserted under the battery
compartment cover. The orientation of these is shown moulded into the battery
compartment.
The power of the burner can be adjusted up and down by pressing the – and +
buttons. After fitting the batteries and replacing the cover the fire can now
operate. Slide the power isolator switch to the right to the on / I position.
To start the fire, press the power button and hold for 1 second then release. The
burner will within around 1 to
10
seconds, adjust to the maximum power setting,
To stop the fire, simply press the power button again and the burner will stop.
If you are not intending to use the fire for a long period (i.e. over summer time
months) the battery life can be extended even more by sliding the isolator switch
to the left (away from the “on” / “I” position,
symbol 0
).