Hotspur 5 & 9 Issue 2 December 2017
3
Introduction
May we take this opportunity to thank you for choosing one of our stoves.
These appliances are designed to burn wood logs and wood derived fuels. It is essential that your wood
has been seasoned to ensure that it is sufficiently dry for burning. You can determine the moisture
content of your logs by using a digital moisture meter, your logs need to be below 20% moisture content
before they are considered dry enough for burning. Please note an optional kit is available which will
enable you to burn certain coals, this kit consists of a pair of refractory bricks (these bricks must be
present in the firebox at all times when burning coal).
Never burn wood that contains paint, glue or any other chemicals
See the section “Lighting the Stove” for further details. After reading this document, if there is anything
you are unsure about, please contact your dealer or our Technical Support Department.
These instructions cover the basic principles to ensure the satisfactory installation of the stove, although
detail may need slight modification to suit particular local site conditions. In all cases the installation must
comply with current Building Regulations, Local Authority Byelaws and other specifications or regulations
as they affect the installation of the stove.
It should be noted that the Building Regulations requirements may be met by adopting the relevant
recommendations given in British Standards BS 8303 and BS EN 15287-1 2007 + A1 2010 as an
alternative means to achieve an equivalent level of performance to that obtained following the guidance
given in Approved Document J.
Please note that it is a requirement under the Broseley Fires warranty system that the installation
of the stove is carried out by a Competent Person registered with a Government approved
Competent Persons Scheme. HETAS Ltd operate such a Scheme and a listing of their Registered
Competent Persons can be found on their website at
www.hetas.co.uk
.
Packing List
1x Steel Body stove
2x Vermiculite side firebricks (Left & Right)
1x Log retainer
2x Vermiculite rear firebrick (Lower & Upper)
1x Vermiculite Bottom Rear
2x Vermiculite Base Side (Left & Right)
1x Instruction booklet
2x Baffle (Main - Vermiculite & Top - Steel)
1x Heat Proof Glove
1x Cast Iron Grate
1x Top Outlet Spigot (Fitted)
1x Steel Ash pan
1x Air Intake Stub (Fitted)
1x Top Lid Blanking Plate (For rear outlet only
–
Hotspur 5)
All parts will be inside the main stove body upon delivery. The spigot will generally be
bolted to the top of the stove body.
Optional Extras (With product codes)
S-HOTSPUR5/COAL & S-HOTSPUR9/COAL - Coal Kit for 5 & 9 kW Stoves
S-HOTSPUR5/RF
- Rear flue outlet (Hotspur 5 Only)
S-DEAS/KIT/100 (Various Colours See page 10) - Direct External Air Supply (DEAS)