Hotspur 5 & 9 Issue 2 December 2017
10
Chimney Requirements
Rear Flue Installations
– Using optional rear flue spigot (HOTSPUR 5 ONLY)
If fitting the appliance with a rear flue outlet, the top spigot will need to be replaced with
the optional reaf spigot (not supplied as standard). The optional rear spigot replaces the
top spigot and allows for a rear flue. It is recommended that only a 90 degree T flue
section is used directly out of the rear flue spigot. Access for cleaning the flue should
also be made available in the connecting vertical flue. The code for ordering the rear
flue spigot is S-HOTSPUR5/RF for Hotspur5
To fit the rear flue spigot you will first need to lift off the lid of the stove and then remove
the original top spigot. The sequence below will guide you through this process:
Step 1.
Remove the vermiculite baffle
Step 2.
Remove the square secondary metal
baffle that is adjacent the fitted spigot.
Step 3.
Loosen the 4 x Allen key bolts holding
the spigot in place.
Step 4.
Fit the new rear outlet spigot and
follow current sequence in reverse.
Note: The lid can be removed for easy viewing and spigot change over. Once the lid is
placed back on the stove, use blanking plate supplied to cover the hole left in the lid for
the top outlet spigot.
