14
15
SETTING THE 3D LEVEL
The 3D button on the controller allows you to adjust the depth
of the massage node rotation (the 3D massage effect), from
Level 1 (lightest) to Level 5 (deepest).
SETTING THE HEAT OPTION
You can turn the heat option on or off in the lumbar and/or
calf region using either the Heat button on the controller or
the Heat menu.
SELECTING ZERO GRAVITY POSITION
You can enjoy your massage in a standard sitting position or in the
Zero Gravity position. In Zero Gravity, the backrest reclines and the
footrest is raised, allowing you to raise your feet above your heart.
Press the Zero Gravity button on the controller to activate Zero
Gravity. Press again to deactivate.
Once Zero Gravity is activated, it will override any programmed chair
movement in the Auto programs.
ADJUSTING THE FOOTREST AND BACKREST
POSITION
You can adjust the position of the footrest and backrest using the Footrest
and Backrest position buttons. Press and hold the button until the footrest or
backrest is in your preferred position. The chair will beep while the footrest or
backrest is moving.
Once the footrest and/or backrest position has been adjusted, it will override
any programmed position in the Auto programs.
Press and hold to move
the backrest up
Press and hold to move
the footrest up
Press and hold to move
the footrest down
Press and hold to move
the backrest down
PRODUCT CARE AND STORAGE
Storing the Massage Chair
• Disconnect the massage chair from
the power source after use.
• Keep the massage chair away from
direct sunlight, high temperature or
high humidity.
• Do not put heavy objects on the
massage chair.
• If the outer cover is torn or the
mechanism is damaged, stop using
the chair and contact Brookstone at
866-336-3199.
• Do not store the massage chair
under direct sunlight or in places of
high temperature. This may cause
the upholstery to fade.
Cleaning the Massage Chair
Never use scouring pads, abrasive
cleaning agents or aggressive liquids
such as petroleum or acetone to clean
the chair.
Do not immerse the chair in water.
To clean the massage chair:
• Remove the main plug from the
electrical socket.
• Clean the controller and cords with
a dry cloth. Do not use a moist cloth
or a cleaning agent on the controller
or cords. You may clean the chair
with a cloth dampened with water,
but do not use any solvents or abra-
sive cleaning agents.
• If a damp cloth is used, allow the
chair to air dry. Do not use an elec-
trical dryer. Be sure that the chair is
completely dry before plugging the
power back into the electrical outlet.
• Do not pour any liquids directly onto
the chair.
Caution
Do not use abrasive cleaning agents
like benzene, alcohol, or thinner to
clean the massage chair.
Caution
• Any additional servicing should be
performed by an authorized service
representative. This chair has no user
serviceable parts inside.
ACTIVATING FOOTREST ROLLERS AND AIRBAGS
You can activate and deactivate the rollers and airbags in the footrest. Press
the Footrest Rollers and Airbags button once to turn off the rollers in the
footrest. Press again to turn off the air bags in the footrest. Press a third
time to turn the rollers and airbags in the footrest on.
Press once to turn off
rollers; press again to
turn off airbags; press a
third time to turn rollers
and airbags on
Summary of Contents for Renew 3D
Page 1: ...Renew 3D Massage Chair ...
