Brookstone Renew 3D, Manual

Page: 7 / 11

10 11
STARTING, PAUSING, AND STOPPING YOUR
MASSAGE
• To turn on the massage chair, click on the main power switch on the
back of the chair, then press the Power Button on the controller . The
chair moves to its Home position (legrest slightly raised, backrest slightly
reclined, rollers in upper part of backrest), and the Menu Panel lights up.
If no selection is made after 3 minutes, the chair will go into sleep mode
and the Menu Panel light will go off. If there is no movement or activity
for 15 minutes, the remote will power down. The first press of the Power
Button will wake the remote up; the second press of the Power Button will
return the chair to the Exit position. Any button pressed on the controller
will wake the controller from sleep mode.
• To pause the motion and timer, press the Pause Button . The chair will
enter idle mode. The air cells deflate, but the rollers do not return to their
Home position. Press again to resume your massage.
• To turn off the massage chair, ensure that there are no obstacles under
the footrest and press the Power button. The rollers return to their Home
position, all air cells deflate, and the chair moves to the Exit position. Click
off the main power switch on the back of the chair and unplug the chair.
MAIN MENU OPTIONS
When you turn on the massage chair, the Menu Panel becomes active and
displays the Main Menu.
To navigate between the options in the Main Menu, use
the Navigation Control’s arrow buttons to
move up, down, left, and right. Press OK
to confirm your selection. To return to the
Main Menu, press the Menu button on the
controller or press the left arrow.
The five options on the Main Menu are:
• AUTO
allows you to select one of nine automatic
massage programs. You can customize some aspects of these programs,
such as the massage time and heat setting. See Page 11 for more
information on Automatic Programs.
• CUSTOM allows you to select the type of massage and set options such
as speed, air intensity, and the zone for the massage. See Page 12 for
more information on Custom options.
• HEAT
allows you to turn the heat feature on or off in target zones. The
default is off for most automatic programs.
• TIME allows you to set a timer for your massage in increments of 10, 15,
20, and 30 minutes. You can also add 5 minute increments, up to a 30
minute maximum. The default massage time is 20 minutes.
This option also shows the Total Run Time, which is the total minutes the
chair has run for the life of the chair.
• LANGUAGE
allows you to set the language to be used in the Menu
Panel to English or Chinese.
SHOULDER SENSING
When you select an automatic or custom massage, the chair begins by
sensing your shoulder height. The sensor will beep for several seconds,
during which time you can modify the setting. Press the UP and DOWN
buttons on the navigation control to change the shoulder position. Once the
beeping stops, the shoulder height is set. To reset, you must power down the
chair.
AUTOMATIC PROGRAMS
Selecting AUTO in the Main Menu displays nine Automatic Program options:
• RENEW
The most intense automatic program, with deeply penetrating
massage techniques. This program defaults to 3D Level 2. To increase or
decrease intensity, press the 3D button.
• RECOVERY
This program is less intense than Renew. It uses moderate
3D pressure to help relieve stress and speed recovery from physical or
daily activity. Air cell compression massage is used to improve circulation
as well as relaxation.
• RELAX Focused on total body relaxation with low intensity Shiatsu and
Rolling techniques, and air cell massage. The chair will be in Zero G
position for the majority of the program to enhance your relaxation.
• STRETCH A series of grab, hold and stretch sequences combined with
traditional massage techniques, using varying footrest and backrest
positions. Helps with muscle recovery and other benefits of stretching.
Heat defaults to ON for the beginning of the massage and then turns
OFF halfway through.
• UPPER BODY Focused on the back, arms, shoulders and neck.
• LOWER BODY Focused on lower back, seat and foot massage.
• ALL AIR
A Dynamic Squeeze™ massage, exclusively using air cell
compression. Sequences foot and calf, arms, hands and shoulders.
• NIGHT
Sequence of massage and chair movements to help you relax for
a good night’s sleep. Starts with a quick massage and ends with air only.
To maintain your state of deep relaxation, this program does not signal 1
minute remaining or return to the Home position. To return to the Home
position, press the Power Button.