background image

10

11

SELECTING HUMIDIFIER LEVEL

Press the HUMIDIFIER button to choose between High, Medium and Low Humidifier 
Levels. An LED will denote the selected Humidifier Level.

Note: 

•  The FAN and the HUMIDIFIER can be used simultaneously or separately.

•  If the WATER TANKS are empty, all of the HUMIDIFIER LEDS will flash.    

  After the WATER TANKS are refilled, press the HUMIDIFIER button to choose  
  Humidifier Level.

USING THE AUTO-OFF FUNCTION

1.   The unit can run continuously or you can set an automatic shut-off time  

of 2, 4, 6, 8 or 12 hours.

2.   Press the TIMER button to choose between 2, 4, 6, 8 or 12 hours of auto 

shut-off time. An LED will denote the selected shut-off time. The unit will 
automatically shut off when the selected time has been reached.

Note: When there are no LEDs lit for the Timer function, the unit will  
run continuously.

3.    The Timer counts down when the auto shut-off function is enabled. For example,  

if 12 hours is the initial auto-off selection, after 4 hours have passed, the LED 
will show there are 8 hours left before the unit automatically shuts off.

CLEAN FILTER WARNING

•   The POWER button backlight will flash to alert you that pollutants and particles 

have collected on the FILTER’s stainless-steel collection plates. If you see visible 
debris built up on the stainless-steel collection plates, please wash the FILTER.

•   The unit continues to clean the air when the POWER button backlight  

is flashing.

CLEANING THE FILTER

IMPORTANT! Never place a wet FILTER in the unit. Placing a wet FILTER in the 
unit could cause irreparable damage to the unit.

1.   With the unit still plugged into a wall outlet, lift the FILTER COMPARTMENT 

DOOR and remove the FILTER.

Note: The unit must remain plugged into a wall outlet to reset properly. As a 
precaution, if the unit is powered on, it will power off automatically when the filter 
is removed.

2.  Rinse the FILTER with warm, soapy water or place in the dishwasher.
3.  Allow the FILTER to drip dry. Ensure it is completely dry before using.

4.  Place the clean, dry FILTER in the unit. Normal operation can resume.

Note: It may be necessary to clean the FILTER weekly, depending on the air quality 
in your environment. If your environment is filled with heavy smoke, you should 
clean the FILTER at least twice a week to avoid tar build-up on the FILTER.

HELPFUL HINTS FOR CLEANING THE FILTER

•   Do not bend the collection plates in the FILTER to fit them in the  

dishwasher rack. The unit will not function properly if the collection plates  

845680_I

N

S_Pure 

Ion 

Humidifier

5”W

x4.75”H_Output:100%_Prints:1/1,Blk

 

Summary of Contents for Pure-Ion Bedroom













Reviews: