Brookstone Pure-Ion Bedroom User Manual Download Page 10

8

SETTING UP THE UNIT

IMPORTANT: Placement of this unit MUST BE AT LEAST 24" from the wall, 
furniture or other appliances.

1.  Remove all tape and protective wrap from the unit. Ensure the foam block on  

 

top of the filter under the FILTER COMPARTMENT DOOR is removed before  

 

use.

2.   Place the unit on a level surface, keeping it at least 24" away from the wall, 

furniture or other appliances. 

3.  Position the unit so the cleaner air flows to your desired location.

4.  Always unplug the unit before filling the WATER TANKS. Lift and remove each  
 

WATER TANK from the unit and turn upside down. Unscrew the WATER TANK  

 

CAP and fill each WATER TANK with water. For best results use distilled water.

5.  Replace the WATER TANK CAP on each WATER TANK and turn the WATER  
 

TANK upright to check for leaks. If any water drips from the WATER TANK  

 

CAP, remove and re-tighten.

6.  Replace the WATER TANKS on the unit.  

Note: 

When moving the unit to a new location, turn the unit off, unplug from the 

electrical outlet and remove the WATER TANKS.  Keep the unit level as there may 
be water in the WATER RESERVOIR.  Replace the WATER TANKS once the unit 
is on a level surface.

845680_I

N

S_Pure 

Ion 

Humidifier

5”W

x4.75”H_Output:100%_Prints:1/1,Blk

 

13

HUMIDIFIER MAINTENANCE

IMPORTANT! RISK OF ELECTRIC SHOCK. 

Always unplug the unit before 

cleaning the WATER TANKS and the WATER RESERVOIR. 

CLEANING THE WATER TANKS 

The WATER TANKS should be cleaned on a weekly basis.
1.  Power the unit OFF and disconnect from the electrical outlet.
2.  Lift and remove each WATER TANK from the unit and turn upside down.    

 

Unscrew the WATER TANK CAPs.

3.  Drain the water from the WATER TANKS and thoroughly rinse with warm water. 

4.  Wipe clean and dry with a clean cloth or paper towel.

DISINFECTING THE WATER TANKS 

The WATER TANKS should be disinfected on a monthly basis.
1.  Power the unit OFF and disconnect from the electrical outlet.
2.  Lift and remove each WATER TANK from the unit and turn upside down.    

 

Unscrew the WATER TANK CAPS.

3.  Fill each WATER TANK with one half gallon of water and one half tablespoon  
 

of chlorine bleach. Let the solution stand for 20 minutes, swishing every few  

 

minutes to wet all surfaces.  

4.  Empty each WATER TANK after 20 minutes and rinse with warm water until no  

 

bleach smell is detected. 

5.  Dry with a clean cloth or paper towel.

Summary of Contents for Pure-Ion Bedroom













Reviews: