CHARGING THE BATTERY
Charge the battery before first use. To charge
the battery:
1. Slide the Battery Brick into the
charging unit supplied with the
drones. Ensure that the connector
is inserted properly, with the
electronic connections matched.
2. Connect the USB connector to the USB
port of an active device, such as a computer
or USB power adapter (not included). While
charging, the red LED in the charging
unit will be on and the yellow LED will be
flashing. A full charge takes approximately
80 minutes.
3. When the battery is fully charged, the green
LED will be solid. Disconnect the cable,
hold the drone’s Battery Release Latch
in the unlocked position
, and insert the
Battery Brick into the drone.
NOTE: Do not leave unattended while
charging. Do not charge overnight.
Brookstone.com | 1-800-846-3000
1 Innovation Way, Merrimack, NH 03054
327024
© Brookstone 2017
