Brooks Automation
FluidX
Part Number: 281947 Rev. C
2. Installation
The system has been designed with minimal user setup
and no software is required, the USB connector cable is
already fitted.
Step
Action
1.
Ensure the connector cable is fully inserted into
the Scope reader, then connect the USB end to
the USB port on the host device to power up the
reader.
2.
The unit will beep twice and the LED will turn off.
The Scope USB is now ready for use.
NOTE:
Any 2D Coded Tube scanned will
be sent directly through the keyboard
buffer to wherever the cursor is blinking.
2
Copyright © 2020, Brooks Automation, Inc.
