brondell Revive PR50-B, Owner'S Manual

Page: 29 / 104

27
Humidifying
Specialized
HEPA+Carbon
Step 3a
CLEANING THE EXTERIOR
1. Cleaning the Back Cover
a. Remove the Back Cover by pulling down on the
indentation at the top and lifting it away from the body
of the machine.
b. Clean off the Back Cover with a soft brush or cloth and
put the Back Cover onto the Revive. You can also use a
vacuum cleaner if desired.
2. Cleaning the Body Panels
a. Use a soft, dry cloth to sweep dust and loose particles
off of the Revive’s body.
b. Use a damp cloth to remove additional dirt. Do not use
abrasives.
3. Cleaning the Air Outlet Vents
a. Clean off the Air Outlet Vents with a soft brush or cloth.
You can also use a vacuum cleaner if desired.
Step 1b
Step 2a
COMPONENT CLEANING CYCLE
Back Cover Every 4 weeks
Body Panels Every 4 weeks
Air Outlet Vents Every 8 weeks
Air Quality Sensor Every 8 weeks
Always unplug the power cord before cleaning the Revive.
Do not use bleach, chlorine, abrasives, or soaps/detergents that contain solvents.
Do not spray water into or on the Revive to clean it.
Below is a recommended cleaning schedule for the Revive’s exterior and Air Quality Sensor.
This is only a guideline, however, as time of use and prevailing air quality will have the greatest
effect on how often these components need to be cleaned.
ADDITIONAL MAINTENANCE