brondell FS-10, Owner'S Manual

Page: 4 / 9

4 5
Configuration
Installation
Check the size of the connection at your water supply shut off
valve . It needs to be a 3/8” connector for our T-valve to install
between the supply line and the shut off valve . Note: if you have
a 1/2” water supply connection at the wall, you will need to
purchase the following reducing adapter available online and at
many plumbing hardware stores: Reducing Adapter, 1/2” Female
NPT X 3/8” Male Compression.
Check the water supply line that connects the toilet tank to the
water shut off valve at the wall . If it is a rigid pipe, you will need
to purchase a flexible water supply hose to replace it before
installing the FreshSpa . The length of the hose will vary, the
top connection size should be 7/8” ballcock to connect to your
fill valve under the toilet tank and the bottom connection size
should be 3/8” female compression to connect to the FreshSpa
brass T-valve .
1) Remove existing toilet seat
a. Lift hinge covers and use flathead or Phillips head screwdriver
to remove the mounting bolts . Alternatively, you may need to
loosen mounting bolts underneath the seat .
b. Remove the toilet seat and set the seat, mounting bolts and
hardware aside .