13
5. energy cOntrOl
The RFS 2.1 transceiver allows you to change the power outlet of all RFS 2
or RFS 2.1 flash units that are set to the same studio address (in "ST" mode),
and to change the output of individual lamp channels (in "LP" mode). The
output can be adjusted in 1/10 and whole f-stops.
mode "st"
Briefly press the key "
":
all the RFS 2 or RFS 2.1 units increase the total energy by 1/10 f-stop
Briefly press the key "
":
all the RFS 2 or RFS 2.1 units reduce the total energy by 1/10 f-stop
Long press of the key "
":
all the RFS 2 or RFS 2.1 units increase the total energy by 1 f-stop
Long press of the key "
":
all the RFS 2 or RFS 2.1 units reduce the total energy by 1 f-stop
