12
4. setting the lamp channel
With the RFS 2.1 Transceiver you can define and adjust the individual lamp
outlets on the flash units as you wish. To make the adjustments, please fol-
low the procedure given in the operating instructions for the flash unit con-
cerned.
To set the lamp address, proceed as follows:
(the RFS 2.1 Transceiver must be in "LP" mode. Should the "ST" mode be
selected, please change to mode "LP" by pressing "set" for longer)
1.) Press the "set" key briefly until the display blinks "LP" and shows the
lamp number.
2.) Use the "
" and "
" keys to set the lamp address.
3.) Save the setting by pressing the "set" key briefly.
"LP" will now be displayed (without blinking).
