Brompton TESSERA M2, User Manual

Page: 93 / 296

TESSERA - V3.0 | USER M ANUAL - REV B | 8.9 - SUB-FIXTURES
93
8.9.3 - ASSOCIATING SUB-FIXTURES
Sub-fixtures m ay be individually positioned and rotated on the canvas, just like norm al fixtures.
Root nodes are not typically able to detect what types and quantities of sub- fixtures are
connected to their outputs and m ust be assigned by the processor. Root nodes can be added to
the canvas using the Add Fixtures from Library or Add Fixtures from Network tools.
8.9.3.1 - ADDING SUB-FIXTURES ONLINE OR
OFFLINE
Using Add Fixtures from Library or Add Fixtures from Network
1. Click Add Fixtures from Library or Add Fixtures from Network
2. Select the root node and place it on the canvas.
3. Press Enter to return to the Canvas view.
4. Right-click in the root node and select Add Sub-fixtures.
5. Repeated presses of Tab or the Next Port button advances through the ports, before
returning to adding root nodes.
6. The type of fixture can be selected from the Library list. Select the relevant sub-fixtures
and add them to the canvas.
Fig 8.24 - Adding a sub-fixture to canvas
7. Repeat steps 3 and 4 until all fixtures are placed.
8. Press Enter or Escape to confirm the association
9. If the Configure root nodes error appears. Click the button to confirm topologies and root
node configuration.
Fig 8.25 - Notification to configure root nodes not m atching fixture topology