Brompton TESSERA M2, User Manual, Page: 135 / 296

TESSERA - V3.0 | USER M ANUAL - REV B | 9.7 - TOPOLOGY VIEW
135
9.7 - TOPOLOGY VIEW
The Topology View is exclusive to Tessera SX40 LED Processor s. Topology view shows the
current network topology of the processor, connected Tessera XD Units and fixtures.
On the left, the letters A, B, C, & D represent the physical ports of the Tessera SX40. Green
arrows represent a connection between the processor ports to any connected Tessera
XD Distribution Unit s and their ports. The nam es of the Tessera XD Units are displayed for
recognition.
If fixture chains are connected to any ports, the num ber of fixtures in the chain is displayed in
the topology. Other topologies like daisy-chained Tessera XD Units and fixtures in closed-loop
redundancy is also displayed in this view.
Fig 9.11 - Topology View with Fixtures connected to XD Units connected to SX40 ports A and B
When working with redundancy, cabling errors are displayed with red port num bers and shows
the num ber of fixtures connected to each port.
N OTE Processor redundancy does not appear in the topology view and the offline
processor does not show any connections until it is activated on the Failover pipeline
tile. See Processor Redundancy on page 40 for m ore inform ation.