19
www.bromicheating.com
CONTINUED...
To set heater head angle at high position,
manually push heater head up to align hole then
insert slip pin.
To set heater head angle at low position, remove
slip pin & allow heater head to rest in low posi-
tion. Slip pin does not need to be inserted.
CAUTION: ONLY ADJUST THE HEATER HEAD ANGLE PRIOR TO OPERATION. ADJUSTING WHILST UNIT IS IN
OPERATION OR POST OPERATION CAN CAUSE SERIOUS BURNS
Adjusting the heater head angle
High Head Tilt Position
INSTALLATION INSTRUCTIONS
CONTINUED...
