Bromic Heating Tungsten Smart-Heat Installation, Instruction And Service Manual Download Page 1

Page: 1 / 26

Version 1.3 USA / Can

TUNGSTEN SMART-HEAT™

PORTABLE HEATER

BY BROMIC

INSTALLATION, INSTRUCTION AND

SERVICE MANUAL

SUITABLE FOR GAS RADIANT HEATER MODELS:

TUNGSTEN SMART-HEAT

™

DANGER

If you smell gas:

Shut off gas to the appliance

Extinguish any open flame

If odour continues, keep away from the

appliance and immediately call your gas

supplier or fire department.

WARNING: For Outdoor Use Only.

Do not store or use petrol or other flamable vapor

and liquids in the vicinity of this or any other

appliance.

An LP-cylinder not connected for use shall not be

stored in the vicinity of this or any other appliance.

WARNING

WARNING: Improper installation,

adjustment, alteration, service or maintenance

can cause property damage, injury or death.

Read the installation, operating and

maintenance instructions thoroughly before

installing or servicing this equipment.

DANGER

If you smell gas:

Shut off gas to the appliance

Extinguish any open flame

If odour continues, keep away from the

appliance and immediately call your gas

supplier or fire department.

WARNING: For Outdoor Use Only.

Do not store or use petrol or other flamable vapor

and liquids in the vicinity of this or any other

appliance.

An LP-cylinder not connected for use shall not be

stored in the vicinity of this or any other appliance.

WARNING

WARNING: Improper installation,

adjustment, alteration, service or maintenance

can cause property damage, injury or death.

Read the installation, operating and

maintenance instructions thoroughly before

installing or servicing this equipment.

Summary of Contents for Tungsten Smart-Heat



























Search results

Summary of Contents for Tungsten Smart-Heat

Reviews:

Related manuals for Tungsten Smart-Heat

Brands by name

Popular brands

Bromic Heating Tungsten Smart-Heat, Installation, Instruction And Service Manual

Search results

Summary of Contents for Tungsten Smart-Heat

Reviews:

Related manuals for Tungsten Smart-Heat

Brands by name

Popular brands