5
www.bromicheating.com
MAINTENANCE/ REPAIR
•
Installation and repair must be carried out by a qualified &
licenced service person only. The heater should be inspected
before use and at least annually serviced & inspected by a
qualified & licenced service person.
•
Do not perform maintenance until heater has been turned off,
power disconnected, and heater temperature has cooled to
room temperature.
•
Check for damage to the appliance regularly. If damage to the
appliance is suspected, discontinue use immediately and contact the
supplier or qualified person to repair.
•
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
•
At the end of this product’s useful life, it must not be disposed
of as domestic waste, but must be taken to a collection
centre for waste electrical and electronic equipment. It is the
user’s responsibility to dispose of this appliance through the
appropriate channels at the end of its useful life. Failure to do
so may incur the penalties established by laws governing waste
disposal. Proper differential collection, and the subsequent
recycling, processing and environmentally compatible
disposal of waste equipment avoids unnecessary damage to
the environment and possible related health risks, and also
promotes recycling of the materials used in the appliance. For
further information on waste collection and disposal, contact
your local waste disposal service, or the place of purchase
PRODUCT OVERVIEW
IMPORTANT NOTES AND WARNINGS
CONTINUES
...
PRODUCT FEATURES
•
The Cobalt Smart-Heat Electric heaters are designed
to provide efficient spot heating for commercial and
residential applications.
•
Suitable for indoor and outdoor heating
applications such as restaurants, cafes, bars and
clubs, factories, office spaces, designated smoking
areas, public areas, hotels and more.
•
The heaters are available in 2000W, 3000W,
4000W and 6000W models to suit a range of
environments.
•
High temperature corrosion-resistant coating.
•
IPX4 water ingress protection rating.
•
Soft glow infrared heating element - No harsh
glare.
•
Wall and ceiling mounting brackets allowing
adjustable angle of the heating direction.
•
Heater is equipped with spectral reflector for
excellent radiant heat output.
•
Patent Pending & Australian Registered Design
338721
SPECIFICATIONS
Model
2000W
3000W
4000W
6000W
No. of Elements
Single element
Single element
Double element
Double element
Bracket Length
164mm
164mm
244mm
244mm
Heat Output (Watts)
1.7 - 2.0kW
2.7 - 3.0kW
3.4 - 3.9kW
5.4 - 5.9kW
Heating Area*
up to 6m
2
up to 9m
2
up to 11m
2
up to 13m
2
Power connection required
(Volts/Amps)
220-240V - a.c.
- 50/60Hz/8.3 A
220-240V - a.c.
- 50/60Hz/12.5 A
220-240V - a.c.
- 50/60Hz/16.6 A
220-240V - a.c.
- 50/60Hz/25 A
Dimension (WxDxHmm)
1117 x 214 x 86mm
1410 x 214 x 86mm
1117 x 214 x 86mm
1410 x 214 x 86mm
Weight (kg)
9kg
10kg
9kg
10kg
Approval
CE Approved
*Heating areas are based on protected environment with mounting height of 2400mm. For unprotected and extremely cold and windy environments
heating areas can be less. Please contact Bromic Heating for further advice.
