background image

6

1300 276 642

www.bromic.com/refrigeration

A- THINGS THAT MUST BE DONE BEFORE USING YOUR COOLER

WARNING! 

• 

Since an impact to the glass parts of the products with glass doors by a sharp, pointed object or its contact 

to a very hot substance may cause the glasses to be broken, this matter must be paid attention particularly.

• 

Place your product onto a fl at surface with no slope in order to prevent sliding or tilt over of your product.

• 

Operate your product only at usage position.

• 

Do not expose your product to direct sunlight.

• 

Carry and store your product at normal using position only in order to protect it against damages. Actions 

in contrary may cause loss of the warranty rights.

• 

Make sure that the discharge valve is closed for preventing frost formation inside your product or high

sweating on the glasses.

NOTE

It is at the discretion of the consumer entirely to take action related to the food inside your cooler in case of 

any failure. Our company is not responsible from the deterioration of your foodstuff  due to any failure or usage 

error.
The product you’ve purchased is designed and manufactured for cooling and storing bottles and/or canned 

beverages or packed food only. Our company is not responsible for any damage that may occur in the pro-

ducts, which are used for another purpose.
Check your product if there are any failures or not immediately after receiving the product you’ve purchased. 

If there is any damage, contact to your seller within 24 hours.
CD letters are contained in the model names of the products which are custom made and not standard. Con-

tact to the authorized services for the technical specifications of these products. In order to use your product 

eff iciently and safely, please read this manual entirely before start using your product and keep it as a 

source  of reference. You can  find updated version of the operating manual from our

 

or our authorized 

services.
This product contains (WEEE) classification symbol, which indicates electric and electronic hardware. Accor-

dingly, the user must conform to 2002/96/EC European Directive for recycling in order to minimize the envi-

ronmental impact of the relevant product.
When you intend to throw your product to garbage or to allocate is as scrap, please contact to 

Authorized

 

Services for learning necessary information. Your device must be definitely delivered to local 

WEEE dis-posal institutions in such cases.
The pictures shown in this manual are representative only and my vary depending on the model. Since the 

specifications stated in this manual include all options, some of them may not be present at your product.

6

Summary of Contents for 3736219























Reviews: