16
1300 276 642
www.bromic.com/refrigeration
D- USING YOUR COOLER
Shutting down your product
Defrost function
- Transfer the foodstuff inside your product to a convenient place.
- Unplug your product. (Picture 18)
If your product will not be used for a long time, apply following considerations;
- Clean your product. Otherwise the humidity on the wall may cause darkening of the internal surface.
Your product has automatic defrost function. Your show case will melt frost automatically when it is necessary to defrost
while running
Although your product automatically prevents frost deposit, frost deposit ratio may increase due to high temperature
and humidity as well as frequent use of the device. Running period increases as the frost deposit increases. That also
increases the energy consumption. In such cases, stop your product and ensure melting of the frost.
DO NOT FORGET!
An evaporator without frost will always run with high eff iciency
Water from the evaporator drops onto the drop tray at compressor section. Even though hot gas evaporates water
here, it will be better to check and clean once a month
CAUTION!
If your product will be stored at an indoor place after shutdown;
•
Do not cover it with plastic sheets. Plastic will cause smell and sweating of your product as it does not breat-
he. Corrosion may be seen as the result of sweating.
•
Smell formation may occur in cases where you fail to store your product with the door open.
Picture 18
21
D- USING YOUR COOLER
Shutting down your product
Defrost function
- Transfer the foodstuff inside your product to a convenient place.
- Unplug your product. (Picture 18)
If your product will not be used for a long time, apply following considerations;
- Clean your product. Otherwise the humidity on the wall may cause darkening of the internal surface.
Your product has automatic defrost function. Your show case will melt frost automatically when it is necessary to defrost
while running
Although your product automatically prevents frost deposit, frost deposit ratio may increase due to high temperature
and humidity as well as frequent use of the device. Running period increases as the frost deposit increases. That also
increases the energy consumption. In such cases, stop your product and ensure melting of the frost.
DO NOT FORGET!
An evaporator without frost will always run with high eff iciency
Water from the evaporator drops onto the drop tray at compressor section. Even though hot gas evaporates water
here, it will be better to check and clean once a month
CAUTION!
If your product will be stored at an indoor place after shutdown;
•
Do not cover it with plastic sheets. Plastic will cause smell and sweating of your product as it does not breat-
he. Corrosion may be seen as the result of sweating.
•
Smell formation may occur in cases where you fail to store your product with the door open.
Picture 18
21
