11
1300 276 642
www.bromic.com/refrigeration
14
C -INSTALLATION OF YOUR COOLER.
Shelf spaces of your product can be adjusted as desired.
There are numbers on the backup strips so as to even up the shelf spaces easily. Adjust the backup strips according to
the desired space and attach its clips. To attach the shelf clips, insert the lower part of the foot into the backup strip
and press the upper part with your hand inward and attach the shelf clips. To attach the shelves, open the cover of the
device 90° and install the shelves. You can remove the shelves and shelf clips by doing the opposite process.
Do not mount the shelves in an inclined way.
Installing the Shelves
Picture
9
Before positioning, remove and disassemble all packaging materials and bottom wooden pallet of the product. (It may
be necessary to lift the cooler for removing the bottom pallet).
Insert the replacement parts inside your product according to the installation instructions. Only use genuine spare
parts.
Inauthentic spare parts may constitute danger for you and damage your product.
Place the product anywhere you desire. Consider the placement rules written in the manual while positioning the
product.
Balance your product in width and in depth by means of a water gauge. Perform balancing operation by using
adjustable feet at the bottom front of your cooler. (Picture 9)
In models with wheels (optional), wheel brake (optional) must be locked or if there is no wheel brake, it must be
guaranteed that the device will not move after the positioning of the product.
