GSF2818KSN
Instruction Manual
Guide d’utilisation
10
Step 7 (Assemble the body to the cart)
a) Put the body assembly (D) on the top of cart assembly.
b) Align the two holes on the top of cart right side panel with
the two holes on the right of body assembly.
c) Insert one bolt (AA) with one lock washer (CC) and one flat
washer (BB) into each pre-drilled hole.
d) Tighten all bolts by hand until secure.
e) Repeat the procedure for the left end assembly.
f)
Go back and tighten all bolts using the screwdriver provided.
Attention:
Unpack the hose assembly (located underneath the
firebox) prior to assembling the grill body to the
cart, and pull out the regulator/hose to the cart side
panel as you are completing this step.
Step 8 (Assemble the side bar tool hanger to the side shelves)
a) Turn over the left side shelf (C).
b) String four hooks (B) with the side bar tool hanger (A) then align the holes on the
end of side bar tool hanger (A) with the holes on the left side shelf (C).
c) Insert one bolt (AA), one lock washer (CC) and one flat washer (BB) into each
pre-drilled hole. Tighten bolts by hand until secured.
d) Go back and tighten all bolts using the screwdriver provided.
e) Repeat the procedure for the assembly of right side shelf (R) and side bar tool
hanger.
Step 9 (Assemble the side shelves to the body assembly)
a) Loosen the three pre-installed bolts on the right side of body assembly and leave 1/4 of the bolt's length extendin
g
from body
assembly.
b) Align the holes on the right side shelf (R) with the bolts extended from the right side of body assembly. Push down the right side
shelf until it locks into place.
c) Align the holes on right side shelf with the holes on the control panel and body assembly.
d) Insert one bolt (AA) with one lock washer (CC) and one flat washer (BB) into each pre-drilled hole. (See above diagram). Tighten
bolts by hand until secure.
e) Repeat the procedure for the assembly of left side shelf (C) and body assembly.
D